Skip to content
Free Freight On PARTS Orders $150+ (Exclusions Apply)
Free Freight On PARTS Orders $150+ (Exclusions Apply)

Products

Filters

$
$
$11.00 AUD - $11.00 AUD
$11.00 AUD
$11.00 AUD - $11.00 AUD
$11.00 AUD

2.5" Gasket End Cover Heat Exchanger 1.5mm thick

Marine Energy

2.5" Gasket End Cover Heat Exchanger  2.5" OD / 1.5mm thick nitrile rubber LP GAKHE2.5-1.5

$11.00 AUD - $11.00 AUD
$11.00 AUD
$11.00 AUD - $11.00 AUD
$11.00 AUD
$13.46 AUD - $13.46 AUD
$13.46 AUD
$13.46 AUD - $13.46 AUD
$13.46 AUD

2.5" Gasket End Cover Heat Exchanger 3mm thick

Marine Energy

2.5" Gasket End Cover Heat Exchanger  2.5" OD / 3mm thick nitrile rubber LP GAKHE2.5-3

$13.46 AUD - $13.46 AUD
$13.46 AUD
$13.46 AUD - $13.46 AUD
$13.46 AUD
$1,400.00 AUD - $1,400.00 AUD
$1,400.00 AUD
$1,400.00 AUD - $1,400.00 AUD
$1,400.00 AUD

2.5” Seawater Strainer (Side In Side Out) Stainless Steel 2205

Marine Energy

S (Solid Lid) & C (Clear Lid) Free standing, base mounted Electro-polished AISI Duplex 2205 Cast Stainless Steel BSP  thread Side female inlet...

View full details
$1,400.00 AUD - $1,400.00 AUD
$1,400.00 AUD
$1,400.00 AUD - $1,400.00 AUD
$1,400.00 AUD
$792.00 AUD - $803.00 AUD
$792.00 AUD - $803.00 AUD
$792.00 AUD - $803.00 AUD
$792.00 AUD

2.5″ Seawater Strainer (Bottom In Side Out) Stainless Steel 2205

Marine Energy

S (Solid Lid) & C (Clear Lid) Electro-polished AISI Duplex 2005 Cast Stainless Steel BSP  thread  2.5″ has vertical female inlet, side female ...

View full details
$792.00 AUD - $803.00 AUD
$792.00 AUD - $803.00 AUD
$792.00 AUD - $803.00 AUD
$792.00 AUD
$11.00 AUD - $11.00 AUD
$11.00 AUD
$11.00 AUD - $11.00 AUD
$11.00 AUD

2.75" Gasket End Cover Heat Exchanger 022851 22851

Westerbeke

Westerbeke Gasket, Heat Exchanger 022851. 2.75" OD / 1.5mm thick. This is an original Westerbeke part 022851.

$11.00 AUD - $11.00 AUD
$11.00 AUD
$11.00 AUD - $11.00 AUD
$11.00 AUD
$2,640.00 AUD - $2,640.00 AUD
$2,640.00 AUD
$2,640.00 AUD - $2,640.00 AUD
$2,640.00 AUD

202-1062 Caterpillar Transmission Cooler

Marine Energy Systems

202-1062 Caterpillar Transmission Cooler by Mr Cool USA Some details to note:    This cooler is paired with Caterpillar C18 Models. 4-1/8” outside...

View full details
$2,640.00 AUD - $2,640.00 AUD
$2,640.00 AUD
$2,640.00 AUD - $2,640.00 AUD
$2,640.00 AUD
$1,850.00 AUD - $1,850.00 AUD
$1,850.00 AUD
$1,850.00 AUD - $1,850.00 AUD
$1,850.00 AUD

2254-1-7 Sendure Oil Cooler replacement

Mr Cool (USA)

2254-1-7 Sendure Oil Cooler replacement 3" x 12" Class II High Pressure Cooler made of 90/10 Cupro Nickel tubes, 375 PSIG oil side. 3” diameter 12”...

View full details
$1,850.00 AUD - $1,850.00 AUD
$1,850.00 AUD
$1,850.00 AUD - $1,850.00 AUD
$1,850.00 AUD
$471.90 AUD - $471.90 AUD
$471.90 AUD
$471.90 AUD - $471.90 AUD
$471.90 AUD

24V Centrifugal Pump 30LPM (EC30 AN 2012)

ANCOR (Italy)

24V 30LPM Centrifugal Pump (EC30 AN 2012) Pump body brass Impeller in brass Connections 1/2 ” Gas/BSP-F Mechanical seal AN 5774 Deliveries 30 l/...

View full details
$471.90 AUD - $471.90 AUD
$471.90 AUD
$471.90 AUD - $471.90 AUD
$471.90 AUD
$520.30 AUD - $520.30 AUD
$520.30 AUD
$520.30 AUD - $520.30 AUD
$520.30 AUD

24V Centrifugal Pump 60LPM (EC60 AN 2014)

ANCOR (Italy)

24V 60LPM Centrifugal Pump Pump body brass Impeller in brass Connections 1/2 ” Gas/BSP-F Deliveries 60 l/min 3600 l/h Head 8 mt Mechanical seal AN ...

View full details
$520.30 AUD - $520.30 AUD
$520.30 AUD
$520.30 AUD - $520.30 AUD
$520.30 AUD
$1,397.55 AUD - $1,397.55 AUD
$1,397.55 AUD
$1,397.55 AUD - $1,397.55 AUD
$1,397.55 AUD

24V Clutch Pump Pedestal Mount (1-1/2") Ancor PM40EM - AN 2016

ANCOR (Italy)

Magnetic Clutch Pump 24 Volt - AN 2016 ANCOR, Made In Italy Replaces Johnson 10-13022 Delivery in litres per minute. Pedestal Mount Flex...

View full details
$1,397.55 AUD - $1,397.55 AUD
$1,397.55 AUD
$1,397.55 AUD - $1,397.55 AUD
$1,397.55 AUD
$0.00 AUD - $0.00 AUD
$0.00 AUD - $0.00 AUD

24V Washdown Pump 120 Litre/min (AN 3960)

ANCOR (Italy)

Ancor of Italy Multi-purpose 24V Electric heavy duty Washdown Pump Designed for marine use.  Bronze body, 1-1/4" Connections, Nitrile Impeller (AN ...

View full details
$0.00 AUD - $0.00 AUD
$0.00 AUD - $0.00 AUD
$550.00 AUD - $550.00 AUD
$550.00 AUD
$550.00 AUD - $550.00 AUD
$550.00 AUD

24V, Multi-Use Pump 45 LPM (EP 45 - AN 697)

ANCOR (Italy)

24V, 45 LPM Multi-Purpose Pump (EP 45 - AN 697) Supplied with nitrile impeller (AN 2080), suitable for oil transfer. Use neoprene impeller for wate...

View full details
$550.00 AUD - $550.00 AUD
$550.00 AUD
$550.00 AUD - $550.00 AUD
$550.00 AUD
$1,143.45 AUD - $1,143.45 AUD
$1,143.45 AUD
$1,143.45 AUD - $1,143.45 AUD
$1,143.45 AUD

24V, MULTI-USE PUMP 60 LPM (EP 60 - AN 3327)

ANCOR (Italy)

24V, 60LPM MULTI-PURPOSE PUMP Supplied with nitrile impeller (AN 2081) suitable for oil transfer. Use with neoprene impeller (AN 3342) for deck was...

View full details
$1,143.45 AUD - $1,143.45 AUD
$1,143.45 AUD
$1,143.45 AUD - $1,143.45 AUD
$1,143.45 AUD
$33.00 AUD - $33.00 AUD
$33.00 AUD
$33.00 AUD - $33.00 AUD
$33.00 AUD

25132-004200 Yanmar V Belt, 6CH, 13A1100

Marine Energy Systems

25132-004200 Yanmar V Belt, 6CH, 13A1100 Yanmar 6AY(M)-ET(E),STE,GT, Yanmar 6HA-HTE, Yanmar 6HA2, Yanmar 6HY(M)-ET(E), Yanmar 6KY(M)-ET(E) SKU - 25...

View full details
$33.00 AUD - $33.00 AUD
$33.00 AUD
$33.00 AUD - $33.00 AUD
$33.00 AUD
$792.00 AUD - $792.00 AUD
$792.00 AUD
$792.00 AUD - $792.00 AUD
$792.00 AUD

2” Seawater Strainer (Side In Side Out) Stainless Steel 2205

Marine Energy

S (Solid Lid) & C (Clear Lid) Free standing, base mounted Electro-polished AISI Duplex 2205 Cast Stainless Steel BSP  thread Side female inlet...

View full details
$792.00 AUD - $792.00 AUD
$792.00 AUD
$792.00 AUD - $792.00 AUD
$792.00 AUD
$792.00 AUD - $803.00 AUD
$792.00 AUD - $803.00 AUD
$792.00 AUD - $803.00 AUD
$792.00 AUD

2″ Seawater Strainer (Bottom In Side Out) Stainless Steel 2205

Marine Energy

S (Solid Lid) & C (Clear Lid) Electro-polished AISI Duplex 2005 Cast Stainless Steel BSP -The Bottom inlet BSP Male is Tapered thread and the ...

View full details
$792.00 AUD - $803.00 AUD
$792.00 AUD - $803.00 AUD
$792.00 AUD - $803.00 AUD
$792.00 AUD
$137.50 AUD - $137.50 AUD
$137.50 AUD
$137.50 AUD - $137.50 AUD
$137.50 AUD

3 inch Stainless Steel Exhaust V Band Clamp

Marine Energy Systems

Replaces Westerbeke Part Number: 038153 For 108B Six Generators

$137.50 AUD - $137.50 AUD
$137.50 AUD
$137.50 AUD - $137.50 AUD
$137.50 AUD
$66.00 AUD - $66.00 AUD
$66.00 AUD
$66.00 AUD - $66.00 AUD
$66.00 AUD

3" End Cover Gasket Kit for Heat Exchanger

Marine Energy

3" Brass End cover Gasket & Bolt- kit  for 3" Heat Exchanger  1 x End Cover, 1 x Gasket, 1 x o-ring Part no. SK3300C

$66.00 AUD - $66.00 AUD
$66.00 AUD
$66.00 AUD - $66.00 AUD
$66.00 AUD
$16.50 AUD - $16.50 AUD
$16.50 AUD
$16.50 AUD - $16.50 AUD
$16.50 AUD

3" Gasket End Cover Heat Exchanger

Marine Energy

3" Gasket End Cover Heat Exchanger Part no. GSK3

$16.50 AUD - $16.50 AUD
$16.50 AUD
$16.50 AUD - $16.50 AUD
$16.50 AUD
$13.86 AUD - $13.86 AUD
$13.86 AUD
$13.86 AUD - $13.86 AUD
$13.86 AUD

3" Gasket End Cover Heat Exchanger 1.5mm thick

Marine Energy

3" Gasket End Cover Heat Exchanger  3" OD / 1.5mm thick nitrile rubber LP GAKHE3.0-1.5

$13.86 AUD - $13.86 AUD
$13.86 AUD
$13.86 AUD - $13.86 AUD
$13.86 AUD
$16.24 AUD - $16.24 AUD
$16.24 AUD
$16.24 AUD - $16.24 AUD
$16.24 AUD

3" Gasket End Cover Heat Exchanger 3mm thick

Marine Energy

3" Gasket End Cover Heat Exchanger  3" OD / 3mm thick nitrile rubber LP GAKHE3.0-3

$16.24 AUD - $16.24 AUD
$16.24 AUD
$16.24 AUD - $16.24 AUD
$16.24 AUD
$1,452.00 AUD - $1,452.00 AUD
$1,452.00 AUD
$1,452.00 AUD - $1,452.00 AUD
$1,452.00 AUD

3" Seawater Strainer (Bottom In Side Out) Stainless Steel 2205

Marine Energy

S (Solid Lid) & C (Clear Lid) Electro-polished AISI Duplex 2205 Cast Stainless Steel BSP Thread Vertical female inlet, side female outlet Secu...

View full details
$1,452.00 AUD - $1,452.00 AUD
$1,452.00 AUD
$1,452.00 AUD - $1,452.00 AUD
$1,452.00 AUD
$770.00 AUD - $770.00 AUD
$770.00 AUD
$770.00 AUD - $770.00 AUD
$770.00 AUD

3"x 4" Cast 316 Stainless Steel Exhaust Mixing Elbow Kit

HDI Marine

3" Flange and 4" Exhaust Outlet in Cast 316 Stainless Steel. Straight mixing kit includes mixing elbow, weldable, stainless steel flange and stainl...

View full details
$770.00 AUD - $770.00 AUD
$770.00 AUD
$770.00 AUD - $770.00 AUD
$770.00 AUD
$11.00 AUD - $11.00 AUD
$11.00 AUD
$11.00 AUD - $11.00 AUD
$11.00 AUD

3/4" Bass Male threaded extention / sleeve

Marine Energy Systems
Low stock

3/4" Bass Male threaded extention / sleeve  used with 3/4" strainers and other applications 

$11.00 AUD - $11.00 AUD
$11.00 AUD
$11.00 AUD - $11.00 AUD
$11.00 AUD